Best Sawzall Blades for Cutting Pvc Pipe

The strong, durable plastic polyvinyl chloride (PVC) may be formed into a variety of useful goods, such as water pipes and decking boards, by plastics producers. When compared to metal, one advantage of wood is its workability; it can be cut with virtually any woodworking saw, including reciprocating saws and jigsaws, which are two saws that use the same cutting motion.

The reciprocating saw (Sawzall) You can cut up to 8″ PVC pipe with a reciprocating saw as long as you have a long enough blade and some experience.

To cut PVC pipe, what’s the best instrument to use?

Using a hacksaw to cut PVC pipe is the greatest approach for straightening it out. If you’re cutting a lot of little, accurate pieces, they’re a great option. If you don’t have a vice, a clamp that maintains the pipe in place as you cut will work just well.

Does PVC pipe require a special cutting tool?

A hybrid wood/metal blade with a 10/14 TPI design is recommended for cutting PVC pipe. PVC Sawzall blades aren’t available, and one isn’t required.

Cutting PVC piping requires the use of specific instruments.

Most people prefer to cut PVC pipes with a hand saw, as the device does most of the work for them. Hand saws, like the plastic pipe cutter, can be purchased for a low cost. It’s recommended to use a hacksaw, as it’s more versatile than any other type of saw.

What Sawzall blade do you use to cut through plastics? 

They can be bent without breaking, making them ideal for cutting wood and plastics. Carbon steel reciprocating saw blades are often the finest for cutting trees. However, high-speed steel blades can last up to five times as long as high-carbon steel, despite their more fragile teeth.

What is the best way to cut PVC pipe neatly?

A hacksaw is the greatest choice because it gives you the most versatility. Use a handsaw to cut pipe by placing it over edge of counter, workbench, and cutting where marked with the saw. Simple and quick. Sawed through the pipe in a back-and-forth manner.

Without a saw, how do you cut PVC pipe?

PVC may be easily cut with a drill and a utility knife. There is another way to cut PVC without a saw besides using rope. Use a drill and a simple utility knife to get started. PVC should be marked and measured, and small holes should be drilled along the cut line with a drill. After that, cut between the slits with the utility knife.

Cutting PVC pipe calls for the use of a good hacksaw blade.

PVC and final cut blades have a TPI between 18 and 24. Despite the fact that the blades are faster and produce a smoother edge on the material than blades with a higher TPI would, the edge is not as smooth as one that a higher TPI would cut. Metal, PVC, and finish-cutting blades fall into the 24-32 TPI range.

6″ L Reciprocating Saw Blade, 8/12 TPI

The reciprocating blades from DeWalt are used to cut the workpiece. It has 14 teeth per inch (TPI), which allows for faster cutting and better edge transition. For strength, flexibility, and durability, the bi-metal reciprocating blades contain teeth with an optimal hardness for the material. The saw blade measures 6 inches in length. Metal reciprocating blades can be used to cut metals and PVC, among other things.

These WARRIOR® reciprocating saw blades are engineered to maintain their sharpness and flexibility while preventing breaking even under the most demanding situations. These reciprocating saw blades are ideal for making quick cuts in nail-bedded wood and are resistant to bending or warping even when faced with the most difficult jobs. These heat-treated blades are designed with 8-12 teeth per inch and are ready to be used in a variety of wood cutting applications due to their high wear resistance.

For rapid cuts and pruning, this Craftsman reciprocating saw blade with six teeth per inch is a great choice. It is made of bi-metal and has a long service life. The bi-metal construction also adds strength, which helps to prevent breaking. This pruning reciprocating saw blade is great for use in wood construction jobs, and it comes with a blade guard, blades from Milwaukee are designed and manufactured for the most demanding professional applications. The material, blade geometry, and heat treatment are all selected to provide the best general-purpose cutting performance possible.

Milwaukee-_48-00-5091-Best-Sawzall-Blades-For-Cutting-PVC-Pipe

Specifications

  • Type: Reciprocating saw blade
  • Packaging: Each
  • Length: 12″ (30.48 cm)
  • Component: Bi-metal blade
  • Utilization: Pruning
  • Style: 5-6 TPI

Features

Features

Benefits

Embedded wood

Ideal for cutting through nail-infested wood and PVC pipe.

Fast

The tip has been optimized for quick and effortless plunge cuts.

Quick cutting

The use of lower TPI allows for quicker and more aggressive cutting.

High TPI

More clean cuts are possible with a higher TPI.

 

Pros

  • High quality,
  • Durable

Cons

  • None

These are fantastic blades that loaded effortlessly into my saw and remained extremely securely in place while in use, which is rare. They cut through the wood I was cutting (2″ x 6″ boards) with no problems, and they didn’t get bogged down or jam up in anything. A fantastic addition to my toolbox, without a doubt.

Wood and Plastic Reciprocating Saw Blade, 6″ Lenox 148216J6R 6 TPI Wood and Plastic Cutting Saw Blade

Blades made of bi-metal bend and resist breaking, hence extending blade life. Blade geometry that is one-of-a-kind sets the blade for optimal cutting effectiveness. The Tuff ToothTM design has been enhanced to cut stronger and endure longer than ever before.

Replacing wood and plastic with a reciprocating system Saw blades are a highly sharp fleam ground blade that is great for cutting clean wood, pruning trees, and plastic pipe, among other things. As a result of the Bi-Metal construction of the blades, the blades are flexible and may be bent without breaking. When cutting, the blade’s design decreases friction and any build-up that may occur.

Wood and plastic-cutting LENOX Tools reciprocating saw blade (six-inch diameter, six-tooth per inch) (148216J6R). Cutting clean wood and plastic tubing swiftly with an extra-sharp fleam grind blade is great for pruning trees and other tasks that require speed. Blades may bend and flex without breaking due to the bi-metal composition of the blades. Designed to reduce friction and build-up while cutting through the largest possible range of metal materials, it is extremely durable. 6-tooth-per-inch blades are the greatest choice for cutting through the thickest metals and general demolition, as well as wood, plaster, drywall, plastic, and composite materials.

Lenox-148216J6R-Best-Sawzall-Blades-For-Cutting-PVC-Pipe

Cutting clean wood and plastic tubing swiftly with an extra-sharp fleam grind blade is great for pruning trees and other tasks that require speed. Blades may bend and flex without breaking due to the bi-metal composition of the blades. Constructed to reduce friction and build-up while cutting through the greatest range of metal materials possible 6.25 teeth per inch blades work well for cutting through the toughest metals, as well as for general demolition and cutting through soft materials such as plywood, plaster and drywall.

Specifications

  • Brand: Lenox Tools Store
  • Size: 6″
  • Manufacturer: Lenox
  • Model: 148216J6R
  • Part Number: 148216J6R
  • Material Type: Metal
  • Product Dimensions: 11 x 1.88 x 0.25 inches
  • Item Weight: 64 ounces

Features

Features

Benefits

Power Blast Technology

Power Blast TechnologyTM is used in LENOX® Bi-Metal Drywall Reciprocating Saw Blades to extend the life of the blade.

High-speed blasting

High-speed blasting along the cutting edge of the blade hardens it, allowing it to survive longer and break less frequently.

T2TM Technology

which has been granted a patent, minimizes cutting forces on each tooth while optimizing chip removal to enable for effective cutting in the largest spectrum of materials.

Performance

Each blade has a distinct configuration, which includes an aggressive tang angle and a tapered blade shape that allows for cutting in confined spaces without compromising cutting performance.

Design

The unique design reduces friction and heat build-up while cutting, resulting in a more precise cut.

Pros

  • Great For Demolition!
  • Durable
  • Easy to use

Cons

  • None

Replacement blades for a folding jab saw and a utility saw are included in this Lenox 148216J6R 5-piece set. Its most common applications include cutting plaster, wood, plastic, and metal materials. Take one of these replacement blades and you’ll be finished in no time!

One 5-pack of 4″ L Hackzall (TM) Blades

With the Double Duty Upgrade, THE TORCH metal-cutting blades have a tooth shape that has been tuned for the longest possible life and maximum durability. Tough Neck is designed to prevent tang breakage and to provide the strongest SAWZALL blade tang available on the market. Grid Iron is distinguished by a honeycomb design stamped into the blade’s body, which significantly increases the blade’s strength, making it the stiffest metal-cutting SAWZALL blade available on the market. These blades are excellent for cutting through thick, straight materials.

Cutting clean wood and plastic tubing swiftly with an extra-sharp fleam grind blade is great for pruning trees and other tasks that require speed. Blades may bend and flex without breaking due to the bi-metal composition of the blades. Constructed to reduce friction and build-up while cutting through the greatest range of metal materials possible 6.25 teeth per inch blades work well for cutting through the toughest metals, as well as for general demolition and cutting through soft materials such as plywood, plaster and drywall.

Milwaukee-_49-00-5414-Best-Sawzall-Blades-For-Cutting-PVC-Pipe

Blades with a narrow kerf design have been developed to improve the cutting performance of the new Reciprocating Saw. This decreases the amount of drag and resistance experienced during cutting, allowing for more cuts per battery charge. Various types of blades are available for a number of applications in the fields of HVAC, electrical, plumbing, and maintenance/repair. There are three blades in this set.

Specifications

  • Blade Length: 8″
  • TPI: Coarse
  • Blade Width: 3/4″
  • Thickness: .040″
  • Blade Type (recipro saws): Specialty
  • Blade Material: Grit
  • Blade Shape: Straight Back
  • Application (recipro blades): Brick, Tile, Marble, Stone, Cast Iron Pipe, Melamine, Veneer, Fiberglass
  • Material Cut: Composite, Stucco
  • Package Quantity: 2
  • Shipping Weight: 3.88 lbs.

Features

Features

Benefits

Design

Teeth design that is optimized to provide two times the longevity of our prior generation

Rigid

Grid IronTM honeycomb pattern boosts blade rigidity, allowing it to withstand buckling and bending.

Reduce breaking

SAWZALL® blades are a type of circular saw. Tough NeckTM ribs help to reinforce the tang of the blade and reduce breaking.

Structure

Blades made of bi-metal structure endure ten times longer than blades made of HCS.

Pros

  • Consistent
  • Reliable
  • Fast Cutting Speed

Cons

  • None

These blades are mostly used for vehicle salvage work. These blades provide rapid cutting performance as well as a long overall service life. My go-to blades are without a doubt.

Recommended Readings (Power Tools Bible)

Be a part of our Email list

Get to know about